angore
Member
Posts: 5,346
What I collect: WW, focus on British Empire
|
Post by angore on Oct 14, 2019 21:59:14 GMT
Steiner's Canada pages provides 2 spaces for the 37c smaller Parliment. In my 2016 Scott, it shows 13½x13 and 13½x14 varieties. I suspect the heading on the Steiner page is incorrect so I put the 13½x13 stamp in the 13x13½ space.
Can someone confirm the versions of the stamp?
|
|
khj
Member
Posts: 1,460
|
Post by khj on Oct 14, 2019 23:43:29 GMT
Yes, the header is incorrect. It should read 13½x13 and 13½x14, respectively.
Technically, the 13½ should be 13.3, but Scott didn't do the decimal thing until later and hasn't bothered to go back to update all the older listings.
EDIT: sorry, please see next post for correction
|
|
khj
Member
Posts: 1,460
|
Post by khj on Oct 15, 2019 0:29:31 GMT
My eyes are getting very bad. I only now see the middle stamp is 38¢. This is to correct my reply above.
In that case, there should be 3 different perforation headers, from left to right, respectively: 13½x13, 13x13½, and 13½x14
Using the more accurate decimals, they would be: 13.3x13.0, 13.1x13.6, and 13.3x14.0
|
|
angore
Member
Posts: 5,346
What I collect: WW, focus on British Empire
|
Post by angore on Oct 15, 2019 13:14:33 GMT
Thanks. I figured there should be 3 headers. My only concern was there was another variety lurking somewhere in Scott.
|
|
hrdoktorx
Member
Posts: 6,604
What I collect: France (and French territories), Africa, Canada, USA, Germany, Guatemala, stamps about science, flags, maps, stamps on stamps...
|
Post by hrdoktorx on Oct 16, 2019 5:17:24 GMT
This discussion begs the question, is the standard for listing the perforations VxH or HxV (horizontal/vertical)? I am never sure.
|
|
stanley64
Member
Posts: 1,825
What I collect: Canada, USA, Netherlands, Portugal & Colonies, Antarctic Territories and anything that catches my eye...
|
Post by stanley64 on Oct 16, 2019 6:01:02 GMT
I believe there is a standard, paper measurements: "W" x "H" and for our stamps that translates to Top/Bottom x Sides and think that is HxV, but do not want to confuse myself :-)
This is often included as part of the introduction to a stamp catalogue and is a handy reference if you forget and need confirmation...
|
|
khj
Member
Posts: 1,460
|
Post by khj on Oct 16, 2019 6:45:22 GMT
Perforation measurements are given in clockwise rotation, starting from the top (e.g., for rectangular stamps, top, right, bottom, left).
When the stamp sides don't have the same perforation measurement, it is said to have compound perforation.
A common type of compound perforation is when opposite sides are the same. Then the top x right perforation measurements are sufficient, as in the case of the OP.
The are a few examples of compound perforations where 3 or even all 4 sides have different perforation measurements. Again, measurement is given in clockwise rotation starting from the top.
Things get a little tricky with non-rectangular or curved stamps, the basic principle is the same -- measurements listed in clockwise rotation.
|
|
hrdoktorx
Member
Posts: 6,604
What I collect: France (and French territories), Africa, Canada, USA, Germany, Guatemala, stamps about science, flags, maps, stamps on stamps...
|
Post by hrdoktorx on Oct 17, 2019 6:31:13 GMT
Most instructive and easy to remember!
|
|
stanley64
Member
Posts: 1,825
What I collect: Canada, USA, Netherlands, Portugal & Colonies, Antarctic Territories and anything that catches my eye...
|
Post by stanley64 on Oct 17, 2019 7:10:40 GMT
Most instructive and easy to remember! Indeed hrdoktorx and after looking at some of the Cinderellas with slogans shared in other threads here on the Forum, the mnemonic for measurements could be "H" before "V", you will never forget...(just like the alphabet) Thanks!
|
|