alan
Member
Posts: 50
|
Post by alan on Mar 7, 2022 21:45:09 GMT
Hello everyone,
Pulled this one out of my collection and took a closer peek at it.
I was hoping to find a Scott #9 A12 5r light blue & red, with the full blue frame around the cross. NOPE! No luck BUT! It has something not showing up in Scott's Specialized Catalogue. See if you spot it on the picture. Zoom in.The arched banner above the crest should read R A Y O N I.It reads on the left side of the banner R A Y in blue with the bottom part of the "Y" missing below the line (now looking like a small "v" only) Then it reads in black R with the top left of the "R" touching the top right corner of the half blue"Y" Then the arched banner shifts downward to the right and contains in blue N I.
So, the bottom half of the "Y" is missing, the "O" is missing, a second "R" (in black) shows up where the "O" should be and there are now 2 distinct arched banners instead if just one. The break is noticeable with the part containing letters " N I. " contained in its own enclosed banner, shifting downwards.
Is this one potentially rare???
Your assistance is appreciated!
Alan
|
|
khj
Member
Posts: 1,469
|
Post by khj on Mar 7, 2022 22:01:36 GMT
Please show back of stamp. It looks like a repair job to me (i.e., someone was trying to fill in a hole) -- notice how the cancel doesn't go over the "R" section in question & the ornament above it to the right isn't correct either.
|
|
Beryllium Guy
Moderator
Posts: 5,662
What I collect: Worldwide Stamps 1840-1930
|
Post by Beryllium Guy on Mar 7, 2022 22:17:07 GMT
Sorry to say, alan , but I agree with Kim ( khj ) on this one. It looks like someone has filled a hole in the stamp with a piece from another stamp or perhaps even using an album image, hence the black color of the filled in letters. This sort of thing happens with old, high CV stamps. I have seen the same thing on multiple occasions with Cape triangles, too.
|
|
alan
Member
Posts: 50
|
Post by alan on Mar 7, 2022 22:25:09 GMT
Thanks gents for the prompt replies. Here is the back of the stamp. Alan
|
|
alan
Member
Posts: 50
|
Post by alan on Mar 7, 2022 22:28:50 GMT
Also,
Just looked real close at the back using a 12X.
No evidence of any tears, cuts, rips or patch jobs
Alan
|
|
vikingeck
Member
Posts: 3,275
What I collect: Samoa, Tobacco theme, Mail in Wartime, anything odd and unusual!
|
Post by vikingeck on Mar 7, 2022 22:59:51 GMT
I think the back is one big adhesion patch which as the others have said is there to plug a hole.
If this was ever soaked to remove the hinge remnant I suspect it would disintegrate into the patch with the black bits and a blue stamp with a thin and a hole.
Sad news but probably best not to soak and just accept that it has been repaired to create a space filler which will pass casual but not close examination. I am afraid you have not found a unique printing error………We all live in hope of making the big discovery but it rarely happens.
|
|
alan
Member
Posts: 50
|
Post by alan on Mar 7, 2022 23:05:00 GMT
khj,
I thought the same thing at first but see a little of the cancel going over the top left of the black R.
Also, the blue N next to the black R shows only a faint cancel too. Makes no sense for someone to fill a hole with 2 patch jobs.
I have a microscope, somewhere, to look deeper.
Thank you again!
Alan
|
|
alan
Member
Posts: 50
|
Post by alan on Mar 7, 2022 23:08:21 GMT
Viking,
I appreciate your input.
If it is a filled hole, whoever did it is a master, leaving no evidence for us to spot.
Alan
|
|
alan
Member
Posts: 50
|
Post by alan on Mar 7, 2022 23:09:53 GMT
Viking,
Also, I was planning on not doing the soak to remove the hinge.
Thanks again!
Alan
|
|
khj
Member
Posts: 1,469
|
Post by khj on Mar 8, 2022 0:33:22 GMT
I thought the same thing at first but see a little of the cancel going over the top left of the black R. I looked at that carefully before I replied the first time. I noticed the coloring of that upper left corner of the "R" is the same as the rest of the stamp lettering but not the same as the rest of that "R". My conclusion -- that's part of the original lettering and the fake "R" was plugged next to it, that is why you see the cancel going over that corner and then ending abruptly instead of passing all the way through to the other side of the plug. I would have to concur with what Beryllium Guy and vikingeck stated -- appears to be a hole plugged with another similar but not identical piece and then patched over from back to hide the plug. My non-expert opinion.
|
|